HYDRAULIC CLAMPING CLYINDERS

  a.Threaded Body Cylinder

  b. Manifold Mounting Cylinder

  c. Hollow Piston Cylinder

  d. Pull Cylinder

  e. Swing Cylinder with overload    Protection

  f. Swing Cylinder without    overload Protection flange

  g. Swing Cylinder without    overload Protection flange

   h. Spring Clamp

  i. Compact Cylinder

  j. Block Cylinder

  K. Vertical swing cylinder

THREDED BODY CLYINDER
SINGLE ACTING (SPRING RETURN), PUSH TYPE

Advantages:
     The cylinder is most simple in construction and very easy for maintenance.The piston force canbe directly used
for clamping (fig. 1) The piston force can be increased by using a clamping strap leverage (fig. 2)

Installation:
     The cylinder can be mounted in two ways -

Figure 1	Figure 2
1. Against front collar with threaded lock nut Front mounting	2. With back mounting holes Rear mounting -

Specifications:

•  Maximum oil pressure 200 bar.
•  Return spring back pressure @ 1 bar.

Note:

•  As the cylinder is single acting spring return, a breather is provided. It should be protected from cutting fluid and coolant.
•  Heavy extensions to piston rod can influence return stroke of the cylinder.
•  Cylinders with non-standard force and stroke can be made available on request.
•  For ordering the seal kit, add the prefix "S" to the part number.
•  Sealkit catalogue details available on request
  
  

^TOP