These
clamping cylinders are single acting spring return cylinders.
These cylinders are fitted either in tapped hole in fixture,
or in manifold. Sealing ‘O’ Ring is provided
at the neck of the cylinder.
Advantages:
These cylinders are suitable to
clamp smaller workpieces & when two or Download
Catalogue (PDF)more jobs are
clamped with short distance in between.
The advantage of these cylinders is piping gets eliminated.
Installation: Sealing ring
is provided with cylinder for proper, resting face should be flat
& square to thread axis.
Notes:
These cylinders must
not be loaded in unpressurised mode. Minimum wall thickness
3 mm for manifold. Aggressive cutting fluids & coolant can
damage elastomer of the seal. Sealing may not be effective in
this case. Hence breather must be protected from these fluids.
For ordering the seal
kit, add the prefix "S" to The part number.
