| 
HYDRAULIC CLAMPING CLYINDERS
a.Threaded Body Cylinder
b. Manifold Mounting Cylinder
c. Hollow Piston Cylinder
d.
Pull Cylinder
f. Swing Cylinder without overload Protection flange
g. Swing Cylinder without overload Protection flange
h. Spring Clamp
i. Compact Cylinder
j. Block Cylinder
K. Vertical swing cylinder |
|
PULL CLYINDER
SINGLE ACTING (SPRING RETURN), PUSH TYPE
FRONT FLAGE MOUNTING
|
|
|
|
| |
|
|
| |
| |
Pull
cylinders are single acting, spring return cylinders, suitable
for use with a hydropneumatic Intensifier.
|
|
|
| |
Installation
A square
flange with 4 mounting holes is provided on the front side for
mounting purpose. The cylinder can be mounted on the
front flange as shownin fig. 1. The cylinder can be mounted on
the back side with long screws as shown in fig. 2.
Specifications:
- Maximum operating pressure
200 bar.
- Return spring back pressure
@ 1 bar.
Note:
- As the cylinder is single acting,
spring return, a breather is provided. It should be protected
from the cutting liquid and coolant.
- Heavy extensions to the piston
rod can influence the return stroke of the cylinder.
- Cylinders with non-standard force
and stroke can be made available on request.
- For ordering the seal kit, add the
prefix "S" to the part number.
- Sealkit catalog details available
on request
|
|
|
