HYDRAULIC CLAMPING CLYINDERS

  a.Threaded Body Cylinder

  b. Manifold Mounting Cylinder

  c. Hollow Piston Cylinder

  d. Pull Cylinder

  e. Swing Cylinder with overload    Protection

  f. Swing Cylinder without    overload Protection flange

  g. Swing Cylinder without    overload Protection flange

   h. Spring Clamp

  i. Compact Cylinder

  j. Block Cylinder

  K. Vertical swing cylinder

 

SWING CLYINDER

i.   With overload protection
ii.  Without overload protection

  
SWING CLYINDER
WITH OVERLOAD PROTECTION
SINGLE ACTING (SPRING RETURN) / DOUBLE ACTING

Application:
     Loading and unloading of the job is very easy due to swing action .In the unclamped position, the workpiece area is free from the stra.

Overload Protection:
      The built-in slip mechanism prevents the damage of the swing mechanism in case of overload.

Versions:

• Type of cylinder
  SW - Single acting (spring return)
  DSW - double acting
• Mounting style
  TM - top mounting
  BM - bottom mounting
• Swing direction
  (While clamping & looking from rod side)
  CW - clockwise
  CCW - counter clockwise
  
  Specifications:
• Maximum oil pressure - 170 bar.
• Minimum oil pressure - 30 bar

Important notes:

•  Double acting cylinders are suitable with the hydraulic power unit.
•  Single acting cylinders are suitable with the hydropneumatic intensifier.
•  Do not exceed the standard strap length.
•  Clamp the job in the straight clamping stroke only.
•  Adjust the oil flow rate in such a way so that the total clamping time will be more than one second.
•  For height adjustment, either use a spacer or an adjusting bolt on the strap as shown in figure.
•  For horizontal mounting of single acting cylinders, weight of the strap should assist the declamping swing stroke.
•  Breather should be protected from cutting liquids and coolants.
•  For ordering the seal kit, add the prefix "S" to the part number.
•  Sealkit catalog details available on request

Mounting and height adjustment

^TOP