| |
Application:
Loading
and unloading of the job is very easy due to
swing action .In the unclamped position,
the workpiece area is free from the strap.
Versions:
- Type of cylinder
SW -
Single acting (spring return)
DSW
- double acting
(While clamping & looking from
rod side)
CW - clockwise
CCW - counter clockwise
Specifications:
- Bore Diameter 30mm
- Maximum oil pressure - 150 bar
- Minimum oil pressure - 20 bar
- Force at 150 bar- 5 KN
Important notes:
- Double acting cylinders
are suitable with the hydraulic power unit.
- Single acting cylinders
are suitable with the hydropneumatic intensifier.
- Do not exceed the
standard strap length.
- Clamp the job in
the straight clamping stroke only.
- Adjust the oil
flow rate in such a way so that the total clamping time will be
more than one second.
- For height adjustment,
either use a spacer or an adjusting bolt on the strap as shown
in figure.
- For horizontal mounting
of single acting cylinders, weight of the strap should assist
the declamping swing stroke.
- Breather should
be protected from cutting liquids and coolants.
- For ordering the
seal kit, add the prefix "S" to the part number.
- Sealkit catalog
details available on request.
^TOP
|
|
