|
Advantages:
As compared to the tie rod construction
cylinders, these cylinders are very compact, due to
the integral
construction.
These cylinders are versatile, i.e. they can be mounted in many
different ways.
Versions:
Two versions are available in all
models
- Double acting
- Single acting push
type, with spring return
Installation:
The cylinder can be mounted on the
front side (rod side), rear side and side faces, as shown
in the figures.
Specification:
- Maximum operating pressure - 200
bar
Note:
- For side mounting, positive stopper should
be provided to reduce the load on the clamping bolts. (fig. 3)
- For the single acting, spring return
cylinder, a breather is provided. It should be protected from
cutting liquids and coolants.
- For ordering the seal kit, add the prefix
"S" to the part number.
- Sealkit catalog details available on
request.
| Figure
1 |
Figure
2 |
Figure
3 |
   |
|
|
