Vertical
swing cylinders are used in applications similar to that
of swing cylinders and can replace swing cylinders in many
places. In the unclamped position, the work piece area is
free from the strap, to facilitate easy loading / unloading.
Description: It
is a double acting cylinder. The job gets clamped in the piston
push direction. The clamping strap is connected to
the piston by a linkage mechanism.
Installation and advantages: Installation
of the cylinder is very simple with 4 cap screws on the top flange.
Clamp and declamp ports are provided on
face of the mounting flange of the cylinder opposite to the clamping
side.
Top of the cylinder body is angled to allow coolant and chips
to flow away from wiper section.
Notes:
Standard strap to be ordered seperately,
if required. In case, a longer strap is required, it should
be designed for increased
bending moment.
The adjusting screw on the strap should
be adjusted for a 3 mm reserve stroke.
For ordering the seal kit, add the
prefix "S" to the part number.
