| 
Pneumatic Clamping Cylinders
a. Pneumatic Swing Cylinder
b. Pneumatic Vertical Swing |
|
PNEUMATIC VERTICAL SWING CLYINDER
DOUBLE ACTING
|
|
|
| |
|
|
|
Pneumatic
vertical swing cylinders are used for clamping in the sheet
metal industry and for light machining applications. In
the unclamped position, the work piece area is free from
the strap, for easy loading / unloading.
|
|
|
|
Description:
It is a pneumatic
double acting cylinder. The job gets clamped in the piston push
direction. The clamping strap is
connected to the piston by a linkage mechanism.
Installation and advantages:
Installation
of the cylinder is very simple with 4 cap screws on the top flange.
Clamp and declamp ports are provided on
face of the mounting flange of the cylinder opposite to the clamping
side. Top of the cylinder body is angled to allow coolant
and chips to flow away from wiper section.
Specifications:
- Maximum operating pressure - 15
bar.
- Clamping force for a standard strap
- 560 N at 6 bar air pressure.
- Weight - 2.5 Kg
Notes:
- Standard strap
(Part no. 3200500), to be ordered seperately, if required. In
case, a longer strap is required, it should be designed
for increased bending moment.
- The adjusting screw
on the strap should be adjusted for a 3 mm reserve stroke.
- For ordering the
seal kit, add the prefix "S" to the part number.
- Sealkit catalog
details available on request.
- To prevent the damage
due to impact use flow control valve at both ports
- We can supply 25,32
& 63 bore cylinders in this catalogs
^TOP
|
|
|
