| |
Specifications:
- Tank - 15 lit. capacity.
- Pump - Radial piston pump,1.2 lit/min.
at 1440 rpm.
- Motor - 1 hp, 3-phase.
- Accumulator - 0.3 lit.
- Solenoid valves with pilot operated Check
Valve
- Operating pressure - 200 bar.
- Maximum oil pressure - 250 bar.
Salient features:
- Modular construction
- There are four separate manifolds, two for the top die and two
for the bottom die. A separate manifold
is provided for the die lifters. All these manifolds are
mounted on the base manifold, which includes pressure switches,
accumulator, pressure relief valve and check valves. The
tandem clamping ensures positive clamping.
- The pump is put
'ON' and 'OFF' by the differential pressure switch, to avoid oil
heating. Extra pressure switches give the
feedback and stop the press.
- Accumulator is fitted
to compensate leakage in case of power failure.
- Direction control
valve allows the operation of either die clamps or die lifters.
^TOP
|
|
